Finalit No. 20 Hot Impregnation

  • Long-term protection of heavily used surfaces against stains and soiling. 
  • Breathable. Transparent. The Goretex effect. 
  • Resistant to UV-rays, de-icing salt, chlorine. Food safe. 
  • Graffiti protection. 
  • For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours. 
  • Tested by the MA 39 Testing and Research Institute of the City of Vienna. 
 

We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m². 

Quantities calculator

Short video Finalit No. 20 Hot Impregnation

Onlineshop

 

We recommend pre-treatment with Finalit No. 21 or 21S!

  • The Goretex effect / breathable 
  • Long-term, transparent protection against stains / soiling 
  • Resistant to UV-rays, de-icing salt, chlorine 
  • Food safe 
  • Penetrates up to 2 cm into the surface depending on the absorbency 
  • Excellent graffiti protection 
  • Drying time, 1 - 2 hours, curing  time is 24 hours 
  • EXPERTS REPORT for vapour diffusion (80% breathable) 
  • Expert report: Technical University of Cologne,
  • MA 39 - Testing and Research Institute of the city of Vienna and the EMPA Institue, Switzerland
   
  • Use undiluted
  • 1 litre is sufficient for 100 m² 
  • The temperature of the object must be above +10°C. The surface to be processed must be clean and dry.
  • With absorbent materials, apply Finalit No. 21 Fixative Penetrating Stopper before treating with Hot Impregnation, with strongly absorbent materials, such as sandstone, limestone, terracotta, etc., apply the Finalit No. 21S Pores Filler.
  • Warm up Finalit No. 20 Hot Impregnation to beteen +50° C and + 70 °C before applying (Always leave the product in the container during heating. Attention! Never allow to come into contact with open flames!)
  • Apply undiluted to the clean and dry surface (1 to 2 times depending on surface absorbing capacity), spreading it evenly 
  • After application, wipe off any surplus of Finalit No. 20 with a cloth or a mop 
  • The drying time is approx. 1-2 hours.
  • If streaks form (you have applied too much), then treat with hot air or apply Finalit No. 20 Hot Impregnation again and wipe off immediately with a cloth 
  • You need to make your own tests. 

For all natural and artificial stones!

  • Synthetic polymer / can be polished
  • Does not contain wax, silicone or acrylate 
  • Long-term, transparent protection for all materials against environmental infuences 
  • The surfaces treated are breathable and resistant to water, stains, UV-rays and de-icing salt 
  • Excellent graffiti protection 
  • Finalit No. 20 is a transparent impregnation that does not form a closed film, which prevents flaking from occurring 
  • Penetrates up to 5 mm into the surface depending on the absorbency